Contact Us

Double Jacket ADSS Cable Span 200M to 1500M

FIBERTURE® supply 2-288 cores double Jacket ADSS Cable for self-supporting and duct applications for cable spans up to 1000m, our ADSS cable has the characteristics of full dielectric, no metal, non-conductivity, small cable diameter, high tensile force, low linear expansion coefficient, and wide temperature adaptation.


We can customize the number of cores of ADSS fiber optic cables according to customer needs. The number of cores of FIBERFUTURE® optical fiber ADSS cable is 2, 6, 12, 24, 36, 48, Up to 288 cores.

indoor-note outdoor aerial duct self-supporting
Fiber Count
Fiber Type


Typical Pole & Tower Installation Position Drawing


Single Jacket ADSS Cable Span 50M to 200M

Main Features

  • Number of fibers from 2 to 288
  • Enhanced technology enables efficient, cost-effective large-scale welding
  • Customized design by application
  • Water blocking technology makes the cable core more process-friendly
  • Increase bandwidth and carrying capacity in high-density applications
  • High-efficiency, low-cost large-scale welding, which can simplify installation and save labor costs
  • Depending on sag and load conditions, excellent performance is suitable for spans up to 1000m

The Color of Fiber and Loose tube

01 - Blue 02 - Orange 03 - Green
04 - Brown 05 - Slate 06 - White
07 - Red 08 - Black 09 - Yellow
10 - Violet 11 - Pink 12 - Aqua


  • IEC 60793, IEC60794
  • IEEE1222
  • ITU-T


Fibers Structure Outside Diameter of Cable(mm) Weight(kg/km) KN Max. Operating Tension KN Max. Rated Tensile Strength Max. Anti-crushing Force
Long term, Short term
Bending Radius Static / Dynamic
2-30 1+6 11.9 117 4.0 15 1000; 3000 12.5D; 25D
22-36 1+6 11.9 117 4.0 15 1000; 3000 12.5D; 25D
38-60 1+6 12.4 127 4.0 15 1000; 3000 12.5D; 25D
62-72 1+6 12.4 128 4.0 15 1000; 3000 12.5D; 25D
74-84 1+7 13.0 144 4.0 15 1000; 3000 12.5D; 25D
96-96 1+8 14.0 162 4.0 15 1000; 3000 12.5D; 25D
98-108 1+9 14.7 177 4.0 15 1000; 3000 12.5D; 25D
110-120 1+10 15.5 196 4.0 15 1000; 3000 12.5D; 25D
122-132 1+11 16.1 211 4.0 15 1000; 3000 12.5D; 25D
134-144 1+12 16.7 229 4.0 15 1000; 3000 12.5D; 25D

If you don’t know how to choose the product you need or can’t find the cable type and size you need on this page, don’t worry. Contact us and send us your requirements, and we will provide you with ADSS cable in full form, we can help you choose the right cable. You can provide us with the following information: cable voltage, conductor material, insulation and sheath material, shield type, armor type, etc. or you can provide us with cable installation environment, application requirements, etc. We will serve you wholeheartedly.


One-stop Solution For ADSS Cable & Hardware


We provide 19 years of experience and excellent solutions for your hardware needs in both ADSS (All-Dielectric Self Supporting), OPGW (Optical Ground Wire), and other cable calmps. Such as suspension clamp, dead-end clamp, dead-end fittings, joint box, etc. We are fully equipped to serve as your hardware provider and be your “one-stop-shopping” service. Or, if you pre f e r, you may purchase the approved hard w a re separately.


Double Jacket ADSS Fiber Cable Double Jacket ADSS Fiber Cable Double Jacket ADSS Fiber Cable

About ADSS Optic Cable Products


ADSS fiber cable is a type of fiber optic cable that is strong enough to support itself between structures without containing conductive metal elements. Both single mode and multimode fibers can be arranged in ADSS fiber cables with a maximum of 144 fibers. ADSS fiber optic cable is designed for outside plant aerial and duct applications in local and campus network loop architectures from pole-to-building to town-to-town installations. The cabling system that includes cables, suspension, dead-end, and termination enclosures offers a comprehensive transmission circuit infrastructure with high-reliability performance.
The structure of ADSS fiber cable can be divided into two categories—central tube structure and stranded structure. In a central tube design, the fibers are placed in a PBT loose tube filled with water-blocking material within a certain length. Then they are wrapped with aramid yarn according to the desired tensile strength and extruded with PE (≤110KV electric field strength) or AT (≥100KV electric field strength) sheath. This structure features with small diameter and light weight but has limited lengths.
In a stranded structure design, the inner optical fibers and water-blocking grease are added into the fiber loose tube, and different loose tubes are wound around the central reinforcement (usually FRP). The rest parts are basically similar to the central tube structure. This type is able to obtain longer fiber lengths. Although the diameter and weight are relatively big, ADSS fiber cables with this structure are better to be deployed for large span applications.


Double Jacket ADSS Fiber Cable

ADSS Cable Factory & Equipment

Double Jacket ADSS Fiber Cable


Double Jacket ADSS Fiber Cable

Contact Us
Find Complete Fiber Optic & Cable System Solutions
Let's Start A New Project Today
We will help you to

Save money - with manufacturer direct pricing

 Save time - with experienced team to get project done

 Lead the industry - with the most cutting-edge products